Heating Mobile forced air oil indirect combustion.

The SOVELOR EC are equipped with a stainless steel combustion chamber fitted with a heat exchanger permitting their connection to a flue for the evacuation of combustion gases. The EC propel a hot air clean, free of odor and waste gas. They can be used in closed rooms, greenhouses, workshops, farms and buildings ... They can also be connected to supply ducts *. It is then possible to let the generator outside and channel the hot air inside the premises (capitals, dryers, reception halls, tents ...). * Except EC 22

performing

The EC offer heating capacities and high air flow rates, allowing rapid temperature rise in the volumes to be heated. Designed to run unattended, they can be controlled automatically by a room thermostat, a clock, a timer ... (options).

economic

The EC are the solution to heat cost industrial or agricultural buildings, capitals, workshops, garages, greenhouses, yards ... Equipped with an integrated fuel tank, installation is limited to connecting to a 230 V and for connection to a flue. Automatic operation allows to precisely adjust the temperature as needed and thermal efficiency limit fuel consumption with just.

well equipped

The EC have as standard equipment to facilitate their use: fuel gauge, storage rack electric cable, oil filter accessible without dismantling and with a tank allowing immediate control, integrated control cabinet in a tight one-piece compartment socket connecting an automatic regulation ...

versatile

Handy, simple installation and use, the EC are designed to be used in the harshest conditions. They can be installed directly inside the rooms or outdoors with connection to a flexible or rigid sheath to convey the hot air inside buildings. For this purpose they can be equipped with quick release blowheads (except EC22, not duct). 
In order to adapt better to the needs of everyone, the EC have a wide range of accessories available as options.

options:

• Room thermostat
• Clock
• weekly clock thermostat
• timer
• Departures 1 or 2 outputs for connecting generators to duct *
• flexible ducts length 6M *
• rigid ducts *
• Chimney units
• Fuel filter heater
• Kit for pumping fuel tank on independent
• Kit for pumping the choice of tank or fuel tank independent
• Hooks for lifting (EC55 - EC85)
• independent mobile fuel tanks.

HIGH PRESSURE PUMP