Security Seals
Shop Professional Equipment KLIMALUX Electrolux

Skopje

Search

TROTEC T2000S multifunction measuring device

Print

Description

T2000 - Practical advantages:

  • Višefukcijski device digital precision with fast display of measured results.
  • Serial interface to connect SDI sensors to measure temperature, humidity, airflow, and non-destructive measurement of moisture.
  • BNC input electrode for accurate measurement of moisture in materials (only for model T2000 S).
  • Especially suitable for measuring the moisture content in the wood because the memory contains data for approx. 500 different types of wood. See: T Tables should type of wood in the T2000.
  • The large backlit display.
  • Easy to use, one-hand operation using a rotary switch.
  • Built-in 24-bit analog / digital converter allows precise results which analog devices can not be achieved.
  • There stands even 30 different electrodes and sensors for the measurement of various parameters.
  • Excellent price / features.


With T2000, now you only need one measuring instrument for many measurement tasks! 

Two models of the device 
SDI sensors 
Temperature sensors 

Electrodes for measuring moisture in wood and building materials 
Accessories


Two models of the device:
There are two different models: the T2000 and T2000S. Both are equipped with a 5-pin connector for SDI and Pt100 sensors. You can also connect the sensors of other manufacturers. 

Model T2000S also has a BNC connector for electrodes for measuring moisture in buildings and wood on the principle of el. resistance. 
T200 is a cheaper solution for users who do not have the need to connect passive electrodes to measure the electric principle. resistance.

 

SDI sensors:
A wide range of measured values can be displayed on the T2000 attaching various SDI sensors. 
All calibration settings at the same time also recorded in SDI sensors. The enclosed certificate with each device T2000 proves accurate measurement. 

You can select from the following SDI sensors: 
TS 200 SDI - humidity sensor and air temperature 
TS 220 SDI - humidity sensor and air temperature 
TS 240 SDI - humidity sensor and air temperature 
TS 300 SDI - dielectric humidity sensor materials 
TS 350 SDI - microwave moisture sensor materials 
TS 400 SDI - sensor flow rates 
TS 420 SDI - the airflow sensor 
TS 460 SDI - sensor flow rates


Pt100 temperature sensors
Electric temperature measurement is made on the basis of two principles: termokapacitivnom principle and the principle el. resistance.Termokapacitivni principle (TS 200 SDI sensor) has a wide measuring range and fast response time. 
Slower sensors (PT100) on the principle of el.resistance despite the fact that they are slower, giving greater accuracy of temperature readings. T2000 measures the surface temperature on the principle of el. resistance. 
When using a T2000 with Pt100 sensor, it is possible to display the minimum, maximum, average and retained value with the current measured values. 

Currently available Pt100 sensors


Electrodes for measuring moisture in wood and construction. Materials
Different versions of electrodes can be used with model T2000S for determination of moisture content in the wood, and moisture content in mineral and porous materials such as plaster and flooring screed. 
Detailed offer available electrodes refer to the corresponding flyers .


Accessories

  1. Compact case for measuring device, SDI sensors, electrodes, cables and accessories.In the case of delivery of microwave sensors is recommended to take more than two suitcase available.
  2. TC 30 SDI connecting cable for connecting SDI sensors.
  3. TC 20 connector cable to connect the electrodes to the BNC connector models T2000 S.
  4. TC 10 adapter for connecting OEM sensors to the T2000.
  5. Extension bracket for SDI sensors .Simplifies measurement in hard-to-reach areas or at too high and too low locations.
  6. Stainless steel filter for T200, T250 and TS 200 SDI. Removable protective cap for use in very dirty conditions.
  7. The calibration block to calibrate the T 200, T 250, TS 200 SDI and TS 220 SDI using appropriate calibration ampoules (supplied without sensor and ampoules).
  8. Ampoules of calibration.
  9. Electrodes coated with Teflon . Available in lengths of 45 and 60 mm.
  10. Spare needle electrodes , uninsulated.
  11. The contact mixture.

Reviews

There are yet no reviews for this product.

Contact

Electrolux
= Klimalux Store =

E-mail:electrolux@t-home.mk
E-mail:natasa@electrolux.mk
Telephone-Bitola: +389 (0) 47 203 330
Telephone-Skopje: +389 02 3298 130
Telephone-Skopje: +389 02 3225 230
Fax:+389 (0) 47 203 900
Mobile Phone Number: +389 (0) 70 237 108

Electrolux