Mobile heating forced air oil indirect combustion.

The EC110 is a high capacity heating fuel with a 2-stage burner for adapting the power needed. 
It combines in one device the advantages of hot air guns (maneuverability and mobility, autonomy, moderate cost ...) and generators to high yields (performance, efficiency, reliability ...). With a heat exchanger at high efficiency, it propels a clean hot air, free of all odors and fumes. It can thus be used directly to indoor after connection to a chimney or be installed outdoors with connection to one or more supply ducts.

Efficient

The EC110 provides a heat output and a very high air flow allowing rapid temperature rise in the premises to be heated.

Mobile

Template and reduced weight in terms of performance developed, the EC110 is a very handy and easy to carry. Its two rugged inflatable wheels with cleats facilitate its movement.Equipped with an integrated high-capacity tank with fuel gauge, installation is limited to the connection to a 230 V power supply and the possible connection to a chimney. The EC110 can be optionally equipped with a kit for pumping to choose his tank or on an independent fuel tank to further increase its autonomy.

innovative

The EC110 is equipped with 2 independent motors. This system allows to completely separate the burner ventilation group, optimizing combustion, making the operation much less sensitive to voltage variations and avoiding the fan to blow cold air on startup. This also allows to use the device only according ventilation, connect the burner on a clean air supply duct in the case of very dusty atmosphere, or to connect an air duct on the suction the device to work in recycling. Big news on a mobile heating, 2-stage burner adapts the power of the device and the temperature of the air blown as needed.

Economic

The EC110 has a cost / performance: fast and inexpensive installation, with high thermal efficiency low consumption token, it can be optionally equipped with an automatic control (room thermostat, clock, timer ...) to precisely control its operation. The possibility of resuming the air already heated in local rather than cold air outside allows fuel savings up to 40%.

options

• Room thermostat
• Clock
• timer
• Departures 1 or 2 outputs for the connection of ducts
• return air connection with setting register
• Connection for fresh air intake burner (snorkel)
• supply ducts or recovery
• reinforced chassis
• Chimney units
• Fuel filter heater
• Kit for pumping choice of independent reservoir or tank
• Hooks for lifting
• Chassis reinforced

HIGH PRESSURE PUMP